Inspection and Replacement Standards
Inspection and Replacement StandardsSTEERING COLUMN ASSEMBLY
1. INSPECTION STANDARD
A vehicle damaged in a collision (regardless of whether or not airbag is deployed).
2. REPLACEMENT STANDARD
Check to ensure that clearance of expand plate on steering column under side is within specifications.
Clearance of expand plate: L
More than 15 mm (0.59 in)
FRONT SUB SENSOR
1. INSPECTION STANDARD
- Check the front section (Refer to shaded area of vehicle in figure) for damage, regardless of whether or not airbag is deployed.
- The designated trouble code is output during self-diagnosis.
2. REPLACEMENT STANDARD
- Bracket is deformed.
- Housing is cracked or deformed.
- The label (that identifies the manufacturing number) is peeled or deteriorated.
- Harness circuit is broken, lead wire is exposed, corrugated tube is cracked, etc.
- Front sub sensor determined as faulty as a result of Diagnostics.
- Airbag is deployed.
- Front sub sensor dropped to the floor/ground.