Diagnostic Chart With Select Monitor

A: BASIC DIAGNOSTIC CHART

B: BATTERY VOLTAGE

C: CHECK VEHICLE SPEED SENSOR 1.

D: CHECK VEHICLE SPEED SENSOR 2.

E: CHECK ENGINE SPEED SIGNAL.

F: CHECK ATF TEMPERATURE SENSOR.

G: CHECK THROTTLE POSITION SENSOR.

H: CHECK GEAR POSITION.

I: CHECK LINE PRESSURE DUTY.

J: CHECK LOCK-UP DUTY.

K: CHECK TRANSFER DUTY.

L: CHECK THROTTLE POSITION SENSOR POWER SUPPLY.

M: CHECK MASS AIR FLOW SIGNAL.

N: CHECK FWD SWITCH.
Diagnosis:
- LED does not come on even if FWD switch is ON.
- FWD switch circuit is open or short.

Wiring Diagram:

O: CHECK KICK-DOWN SWITCH.

P: CHECK BRAKE SWITCH.

Q: CHECK ABS SWITCH.

R: CHECK CRUISE CONTROL SWITCH.

S: CHECK POWER MODE SWITCH.

T: CHECK "N/P" RANGE SWITCH.
Diagnosis:
Input signal circuit of "P" or "N" range is open or shorted.

Wiring Diagram:

U: CHECK "R" RANGE SWITCH.
Diagnosis:
Input signal circuit of "R" range is open or shorted.

Wiring Diagram:

V: CHECK "D" RANGE SWITCH.
Diagnosis:
Input signal circuit of "D" range is open or shorted.
Trouble Symptom:
Shift characteristics are erroneous.

Wiring Diagram:

W: CHECK "3" RANGE SWITCH.
Diagnosis:
Input signal circuit of "3" range is open or shorted.
Trouble Symptom:
- Shift characteristics are erroneous.
- Engine brake is not effected when selector lever is in "3" range.

Wiring Diagram:

X: CHECK "2" RANGE SWITCH.
Diagnosis:
Input signal circuit of "2" range is open or shorted.
Trouble Symptom:
- Shift characteristics are erroneous.
- Engine brake is not effected when selector lever is in "2" range.

Wiring Diagram:

Y: CHECK "1" RANGE SWITCH.
Diagnosis:
Input signal circuit of "1" range is open or shorted.
Trouble Symptom:
- Shift characteristics are erroneous.
- Engine brake is not effected when selector lever is in "1" range.