With Manufacturer's Scan Tool
CLEAR MEMORY MODESUBARU SELECT MONITOR (NORMAL MODE)
1) On the [Main Menu] display screen, select the {2. Each System Check} and press the [YES] key.
2) On the [system Selection Menu] display screen, select the {EGI/EMPI} and press the [YES] key.
3) Press the [YES] key after displayed the information of engine type.
4) On the [EGI/EMPI Diagnosis] display screen, select the {3. Clear Memory} and press the [YES] key.
5) When the "Done" and "Turn Ignition Switch OFF" are shown on the display screen, turn the Subaru select monitor and ignition switch to OFF.
NOTE: For detailed operation procedure, refer to the SUBARU SELECT MONITOR OPERATION MANUAL.
SUBARU SELECT MONITOR (OBD MODE)
1) On the [Main Menu] display screen, select the {2. Each System Check} and press the [YES] key.
2) On the [System Selection Menu] display screen, select the {EGI/EMPI} and press the [YES] key.
3) Press the [YES] key after displayed the information of engine type.
4) On the [EGI/EMPI Diagnosis] display screen, select the {7. OBD System} and press the [YES] key.
5) On the [OBD Menu] display screen, select the {4. Diagnosis Code(s) Cleared} and press the [YES] key.
6) When the "Clear Diagnostic Code?" is shown on the display screen, press the [YES] key.
7) Turn Subaru select monitor and ignition switch to OFF.
NOTE: For detailed operation procedure, refer to the SUBARU SELECT MONITOR OPERATION MANUAL.