Door Trim Panels

REMOVAL AND INSTALLATION

CAUTION: Be careful not to break clip by applying undue force.




1. Front door trim:
1. Remove gusset cover (A), power window switch assembly (B), pocket (C) and inner remote cover (D).
2. Remove screws and then disengage the clips.
3. Detach trim panel and then disconnect connector.
4. Installation is in the reverse order of removal.

2. Rear door trim:
1. Remove handle (E), pocket (F) and clips (G).
2. Remove screws and then disengage the clips.
3. Detach trim panel and then disconnect connector.
4. Installation is in the reverse order of removal.