Neutral Safety Switch: Adjustments

B: ADJUSTMENT
1) Loosen the three inhibitor switch securing bolts.
2) Shift the select lever to the N range.





3) Insert ST as vertical as possible into the holes in the inhibitor switch lever and switch body.
ST 499267300 STOPPER PIN
4) Tighten the three inhibitor switch bolts.
Tightening torque: 3.4±0.5 Nm (0.35±0.05 kg-m, 2.5±0.4 ft. lbs.)
5) Repeat the above checks. If the inhibitor switch is determined to be "faulty", replace it.