Self-Diagnosis Using Select Monitor

FUNCTION MODE

NOTE:
Applicable select monitor cartridge:
No. 24082AA090

Select the "Cruise Control" system using the select monitor and set the "Current Data Display & Save" mode. The following parameters will then appear on the display.
- Vehicle Speed
The current vehicle speed is shown on the display.
- Stop Lamp Switch
When the brake pedal is depressed, the stop lamp switch shown on the display turns from "OFF" to
- Brake Switch
When the brake pedal is depressed, the brake switch shown on the display turns from "OFF" to "ON".
- "SET/COAST" Switch
When the cruise control command switch is placed in the "SET/COAST" position, the SET/COAST switch shown on the display turns from "OFF" to "ON".
- "RESUME/ACCEL" Switch
When the cruise control command switch is placed in the "RESUME/ACCEL" position, the RESUME/ ACCEL switch shown on the display turns from "OFF" to "ON".
- Clutch/Inhibitor Switch
When the clutch pedal is depressed, the clutch/inhibitor switch shown on the display turns from "ON" to "OFF". (MT models)
When the selector lever is moved from the "N" or "P" position to any other position, the clutch/inhibitor switch shown on the display turns from "ON" to "OFF".