Side Air Bag
Construction and FunctionSIDE AIRBAG SYSTEM:
Input of a side impact signal that exceeds a preset value causes the airbag on the side that received the impact to inflate.
The SRS side airbag is provided as an auxiliary driver and passenger front seat restraint system to be used in combination with the seat belt. When an impact greater than a set level is applied to the side of the vehicle, the side airbag sensor senses it and send the ignition permit signal to airbag control module, then inflated the side airbag module, thus preventing the outside upper bodies (chest area) of the driver and passenger in the front seat from impacting the front door.
SIDE AIRBAG MODULE
The side airbag module is located at the outside of the front backrest, and it contains an airbag and an inflator.
If a side collision occurs, the inflator produces a large volume of gas inflating the airbag in a very short time.
AIRBAG CONNECTOR
The SRS airbag adopts a connector which has a double lock mechanism and coupling error detection mechanism for enhanced reliability. If coupling is incomplete, the airbag warning light comes on in the combination meter.