Removal and Replacement

REMOVAL AND INSTALLATION

1. Remove lower trim and disconnect connectors from body harness.
2. Place a cloth or a wood block under door to prevent damage, and support it with a jack.




3. Remove checker bolt.
4. Remove bolts (M8) securing upper and lower hinges to door, and remove door from hinges.

Tightening torque:
25 ± 3 Nm (2.5 ± 0.3 kg.m, 18.1 ± 2.2 ft.lb)




5. Remove hinges by loosening hinges mounting bolt (M8) off of body.

Tightening torque:
29 ± 5 Nm (3.0 ± 0.5 kg.m, 21.7 ± 3.6 ft.lb)

CAUTION: Work carefully to avoid damaging door.

6. Installation is in the reverse order of removal.

NOTE: Apply grease to moving parts of door hinges.