Installation

1. Before installing front oxygen (A/F) sensor, apply anti-seize compound only to threaded portion of front oxygen (A/F) sensor to make the next removal easier.

Anti-seize compound: SS-30 by JET LUBE

CAUTION: Never apply anti-seize compound to protector of front oxygen (A/F) sensor.




2. Install front oxygen (A/F) sensor.

Tightening torque:
21 ± 3 Nm (2.1 ± 0.3 kg.m, 15.2 ± 2.2 ft.lb)




3. Lower the vehicle.
4. Connect connector to front oxygen (A/F) sensor.
5. Connect battery ground cable.