Except California

1. Disconnect battery ground cable.




2. Disconnect connector from mass air flow sensor.




3. Loosen clamp which connects air intake duct to air intake chamber.




4. Remove two clips of air cleaner upper cover.




5. Remove air intake duct and air cleaner upper cover as a unit.




6. Disconnect connector from engine coolant temperature sensor.




7. Remove engine coolant temperature sensor.
8. Installation is in the reverse order of removal.

Tightening torque:
25 ± 3 Nm (2.5 ± 0.3 kg.m, 18.1 ± 2.2 ft.lb)