Suspension: Service Precautions

WARNING: GAS FILLED, DO NOT OPEN, DO NOT HEAT.

CAUTION:
^ On struts which have "GAS FILLED" marked on outer housing under spring seat, completely discharge gas before disposing, following the methods below.
^ Do not disassemble strut damper or place into a fire.
^ Drill holes before disposing of gas filled struts.
^ Before handling gas filled struts, be sure to wear goggles to protect eyes from gas, oil and/or filings.

1. Place gas filled strut on a flat and level surface with piston rod fully extended





2. Using a 2 to 3 mm (0.08 to 0.12 inch) die drill, make holes in areas shown in the figure.