Power Steering Pump

GENERAL SPECIFICATIONS
Output 7.2 cm3 (0.439 cu. inch)
Range Of Revolution 500 - 7,500 rpm
Revolving Direction Clockwise
Hydraulic Fluid Control: Dropping In Response To Increased Engine Revolutions
Pulley Shaft:
Radial Play 0.4 mm (0.016 inch) Or Less
Axial Play 0.9 mm (0.035 inch) Or Less
Pulley:
Ditch Deflection 1.0 mm (0.039 inch) Or Less
Resistance To Rotation 9.22 N (2.07 lbs.) Or Less

TORQUE SPECIFICATIONS
Support Bracket Mounting Bolts 22.0 ± 2.0 Nm (15.90 ± 1.40 ft. lbs.)
Pump To Bracket Bolts 20.1 ± 2.5 Nm (14.80 ± 1.80 ft. lbs.)
Pulley Nut 60.8 ± 6.9 Nm (44.80 ± 5.10 ft. lbs.)
Tank Mounting Bolts:
Outside 15.7 ± 2.4 Nm (11.58 ± 1.77 ft. lbs.)
Inside 18.1 ± 2.5 Nm (13.35 ± 1.84 ft. lbs.)
Adjuster Bolt:
Vertical 8.0 ± 2.0 Nm (69.60 ± 16.80 inch lbs.)
Horizontal 24.5 ± 2.0 Nm (18.07 ± 1.48 ft. lbs.)
Belt Cover:
Vertical Bolts 13.0 ± 3.0 Nm (112.80 ± 26.40 inch lbs.)
Horizontal 24.5 ± 2.0 Nm (18.07 ± 1.48 ft. lbs.)
Pump Connector 74.0 ± 5.0 Nm (54.20 ± 3.60 ft. lbs.)
Rear Cover Bolts 16.0 ± 2.0 Nm (11.60 ± 1.40 ft. lbs.)