Ignition Control Module: Testing and Inspection
INSPECTIONUsing accurate tester, inspect the following items, and replace if defective.
1. Primary resistance
2. Secondary coil resistance
CAUTION: If the resistance is extremely low, this indicates the presence of a short-circuit.
Specific Resistance:
[Primary side]
Between terminal No.1 and No.2
0.73 Ohms ± 10 %
Between terminal No.2 and No.4
0.73 K.Ohms ± 10 %
[secondary side]
Between (A) and (B)
12.8 K.Ohms ± 15 %
Between (C) and (D)
12.8 K.Ohms ± 15 %
3. Insulation between primary terminal and case: 10 M.Ohms or more.