Replacement

A: REPLACEMENT

CAUTION:
- The FMVSS No. 116, fresh DOT3 or 4 brake fluid must be used.
- Cover bleeder with waste cloth, when loosening it, to prevent clutch fluid from being splashed over surrounding parts.
- Avoid mixing different brands of clutch fluid to prevent degrading the quality of the fluid.
- Be careful not to allow dirt or dust to get into the reservoir tank.

NOTE:
- During bleeding operation, keep the clutch reserve tank filled with clutch fluid to eliminate entry of air.
- Clutch pedal operating must be very slow.
- For convenience and safety, it is advisable to have two man working.
- The amount of clutch fluid required is approximately 70 ml (2.4 US FL oz, 2.5 Imp FL oz) for total clutch system.

1. Either jack-up vehicle and place a safety stand under it, or lift-up vehicle.
2. Remove both front and rear wheels.
3. Draw out the clutch fluid from reserve tank with syringe.
4. Refill reservoir tank with recommended clutch fluid.

Recommended clutch fluid:
FMVSS No. 116, fresh DOT3 or 4 brake fluid

5. Bleed air from oil line with the help of a co-worker.