Abnormal G Sensor High - Output

DIAGNOSIS:
- Faulty G sensor output voltage

TROUBLE SYMPTOM:
- ABS does not operate.





WIRING DIAGRAM

10A11:

10A12:

10A13:

10A14:

10A15:

10A16:

10A17:

10A18:

10A19:

10AI10: CHECK ABSCM&H/U
1) Turn ignition switch to OFF.
2) Connect all connectors.
3) Erase the memory.
4) Perform imnspection mode.
5) Read out the trouble code

CHECK: Is the same trouble code as in the current diagnosis still being output?
YES: Replace ABSCM&H/U.
NO: Go to step 10AI11.

10AI11: Check Any Other Trouble Codes Appearance.
CHECK: Are other trouble codes being output?
YES: Proceed with the diagnosis corresponding to the trouble code.
NO: A temporary poor contact.

INSPECTION PROCEDURES