Doors: Testing and Inspection

1. FRONT DOOR GLASS




1. Close front door and make sure of all clearances.
2. If any clearance is not correct, adjust affected parts. Re-check that all clearances are correct.

CAUTION:
- Repeatedly adjust parts until all clearances are correct.
- After clearance adjustment, make sure that all adjusting bolts and nuts are tightened.

2. REAR DOOR GLASS




1. Close rear door and make sure of all clearances.
2. If any clearance is not correct, adjust affected parts. Re-check that all clearances are correct.

CAUTION:
- Repeatedly adjust parts until all clearances are correct.
- After clearance adjustment, make sure that all adjusting bolts and nuts are tightened.