Parking Brake System: Adjustments

D: ADJUSTMENT
1. SHOE CLEARANCE
1. Remove adjusting hole cover from back plate.





2. Turn adjusting screw using a slot-type screwdriver until brake shoe is in close contact with disc rotor.
3. Turn back (downward) adjusting screw 3 or 4 notches.
4. Install adjusting hole cover to back plate.

2. LEVER STROKE
1. Remove console box lid.
2. Forcibly pull parking brake lever 3 to 5 times.





3. Adjust parking brake lever by turning adjusting nut until parking brake lever stroke is set at 7 to 8 notches with operating force of 196 N (20 kg, 44 lb).
4. Tighten lock nut.
5. Install console box lid.
Lever stroke: 7 to 8 notches when pulled with a force of 196 N (20 kg, 44 lb)
Tightening torque (Lock nut): 5