Front Seat Belt

REMOVAL AND INSTALLATION

WARNING: Replace front seat belt worn by occupants of a vehicle that has been in a serious accident. The entire assembly should be replaced even if damage is not obvious.

1. OUTER BELT
1. Remove anchor cover.
2. Remove shoulder anchor bolt.




3. Remove center pillar cover.
4. Remove center lower pillar trim panel.







5. Remove webbing guide.
6. Remove lap anchor bolt.




7. Remove belt retractor and outer belt.
8. Installation is in the reverse order of removal.

CAUTION:
- The left and right ELR's are not mutually interchangeable because different sensors are used.
- Be careful not to twist belts during installation.

2. INNER BELT
1. Disconnect connector.




2. Remove anchor bolt and then detach inner belt.
3. Installation is in the reverse order of removal.

3. ADJUSTABLE SHOULDER ANCHOR
1. Remove shoulder anchor bolt.
2. Remove center pillar cover.
3. Remove center pillar upper trim.




4. Remove adjustable shoulder anchor assembly.
5. Installation is in the reverse order of removal.