Manifold Pressure/Vacuum Sensor: Service and Repair

INTAKE MANIFOLD PRESSURE AND AIR TEMPERATURE SENSORS:

Intake Air Temperature and Pressure Sensor / REMOVAL






1. Disconnect battery ground cable.






2. Disconnect spark plug cord from ignition coil and ignitor assembly.






3. Disconnect connector from intake air temperature and pressure sensor.






4. Remove intake air temperature and pressure sensor.









INSTALLATION
Install in the reverse order of removal.

Tightening Torque: 3.4 N.m (0.35 kgf-m, 2.5 ft-lb)

NOTE: Replace O-ring with a new one.