Rear Wiper and Washer

1. COMBINATION SWITCH (REAR WIPER)

Without Intermittent Rear Wiper:

Set rear wiper and washer switch to each position and check continuity between terminals.

2. WIPER MOTOR




1. Operational check:
Connect battery to wiper motor and check operation of wiper motor.




2. Check wiper motor for proper stoppage:
After operating wiper motor, disconnect battery from wiper motor.




3. Reconnect battery and ensure that wiper motor stops at "AUTO STOP" after it has been operated.

3. REAR WIPER RELAY
1. Connect battery to terminal No.1 and ground terminal No.2.




2. Check continuity between terminals.