Fuel Delivery and Air Induction: Service and Repair

1. Disconnect battery ground cable.




2. Remove bolt which installs air intake duct (A) on the front side of body.




3. Remove bolt which installs air intake duct (B) on body.




4. Remove air intake (A) and (B) as a unit.




5. Disconnect connector from intake air temperature sensor. (2200 cc models)




6. Loosen clamp which connects air cleaner case to throttle body.
7. Disconnect hoses from air cleaner case.
8. Remove bolts which install air cleaner case to stays.




9. Remove air cleaner assembly.
10. Installation is in the reverse order of removal.