Select Monitor Function Mode

Applicable cartridge of select monitor:

NOTE: For basic handling of the select monitor, refer to its Operation Manual.

LIST OF FUNCTION MODE





Analog Data Are Displayed.





On/Off Data Are Displayed.
Trouble Codes Are Displayed.
A maximum of 3 trouble codes are displayed in order of occurrence.





- If a particular trouble code is not properly stored in memory (due to a drop in ABSCM&H/U power supply, etc.) when a problem occurs, the trouble code, followed by a question mark "?", appears on the select monitor display. This shows it may be an unreliable reading.





- *a* refers to the troubles in order of occurrence (Latest, Old, Older and Reference).





Clear Memory





ABS Sequence Control





Freeze Frame Data

NOTE:
^ Data stored at the time of trouble occurrence is shown on display.
^ Each time trouble occurs, the latest information is stored in the freeze frame data in memory.
^ If freeze frame data is not properly stored in memory (due to a drop in ABSCM power supply, etc.), a trouble code, preceded by a question mark "?", appears on the select monitor display. This shows it may be an unreliable reading.





BASIC DIAGNOSTIC CHART

CAUTION: Remove foreign matter (dust, water, etc.) from the ABSCM&H/U connector during removal and installation.

NOTE:
^ To check harness for broken wires or short circuits, shake it while holding it or the connector.
^ Check list for interview.