Passenger Air Bag Module

REMOVAL AND INSTALLATION
1. Turn ignition switch off.
2. Disconnect ground cable from battery and wait for at least 20 seconds before starting work.
3. Remove glove box.




4. Disconnect airbag connector (A) and then detach airbag connector from support beam bracket.
5 Remove three bolts and then carefully remove airbag module while lifting it.
6. Refer to "SERVICE PRECAUTIONS" for handling of a removed airbag module.
7. Installation is in the reverse order of removal.

CAUTION: Do not allow harness and connectors to interfere or get caught with other parts.