Diagnostics Item 6 (6G)

6G1: CHECK HARNESS CONNECTOR BETWEEN SECURITY CONTROL MODULE AND COMBINATION METER.
1. Disconnect connector from security control module and combination meter.

Connector & Terminal - [(B93) No.5 - (i10) No.23]:

2. Measure resistance between security control module connector (B93) and combination meter connector (ii 0).

CHECK: Is the resistance less than 10 Ohms?

YES: Go to step 6G2.

NO: Repair wiring harness between security control module and combination meter.

6G2: CHECK HARNESS CONNECTOR BETWEEN REAR DOOR SWITCH LH AND COMBINATION METER.
1. Disconnect connector from rear door switch LH.

Connector & Terminal - [(R22) No.1 - (i10) No.10]:

2. Measure resistance between rear door switch LH connector (R22. and combination meter connector (i10).

CHECK: Is the resistance less than 10 Ohms?

YES: Go to step 6G3.

NO: Repair wiring harness between rear door switch LH and combination meter.

6G3: CHECK COMBINATION METER CIRCUIT.
1. Remove combination meter.

Terminals [No.10 - No.23]:

2. Measure resistance between combination meter terminals.

CHECK: Is the resistance less than 10 Ohms?

YES: Replace security control module.

NO: Repair or replace combination meter.