Rear Seat

REMOVAL AND INSTALLATION




1. Remove bolts.




2. Slightly raise front of cushion white pushing down on cushion in the direction of "A". With cushion held in that position, move it forward until it is unhooked.




3. Remove bolts securing lower portion of backrest and then open the center trunk through lid.




4. Lift rear seat backrest in direction "B" until it is released.




5. Installation is in the reverse order of removal.

NOTE: When installing backrest, secure two wires to their respective vehicle body hooks. These wires are located on both sides of upper portion of backrest.

CAUTION:
- Before installing seat, ensure that seat belt is placed on cushion.
- Confirm that winding of three-point type seat belt can operate regularly.








Torque specifications