Displaying & Reading Trouble Codes

HOW TO READ TROUBLE CODE OF INDICATOR LIGHT

The AT OIL TEMP indicator light flashes the code corresponding to the faulty part.
The long segment (1.2 sec on) indicates a "ten". and the short segment (0.2 sec on) signifies a "one".





TO EXTRACT CODES:

1. Warm up the engine.
2. Turn the ignition switch OFF.
3. Turn ignition switch ON.
4. Check if the indicator light comes on.
- YES: Go to step 5
- NO: Repair faulty indicator circuit.
5. Drive vehicle at speeds greater than 20 km/h (12 MPH).
6. Stop vehicle, turn ignition switch OFF.
7. Turn ignition switch ON.
8. Move selector lever to 1 position
9. Turn ignition switch OFF.
10 Turn ignition switch ON.
11. Move select lever to 2 position.
12. Move selector lever to 1 position
13. Move select lever to 2 position.
14. Move select lever to 3 position.
15. Move select lever to D position.
16. Ensure that indicator light blinks.
a. Indicator light blinks at 4-Hz intervals (every 0.125 <1/8> second until ignition switch is turned OFF.
- Faulty battery.
b. Indicator light blinks at 2-Hz intervals (Blinks every 0.25 <1/4> seconds (until ignition switch is turned OFF).
- Normal
c. Trouble code is outputted.
- Check problem corresponding with trouble code.
d. Indicator light remains illuminated.
- Check inhibitor switch, wiring, TCM, etc.