M/T

DTC P1110 - ATMOSPHERIC PRESSURE SENSOR CIRCUIT LOW INPUT

DTC DETECTING CONDITION:
- Two consecutive driving cycles with fault

CAUTION: After repair or replacement of faulty parts, conduct CLEAR MEMORY MODE and INSPECTION MODE. Refer to How To Clear Diagnostic Trouble Codes.

10BR1: CHECK ANY OTHER DTC ON DISPLAY.

CHECK: Does the Subaru Select Monitor or OBD-II general scan tool indicate DTC P1110?

YES: Replace ECM.

NOTE: Atmospheric pressure sensor is built into ECM.

NO: It is not necessary to inspect DTC P1110.