Diagnostics Item 10 (6K)

6K1: CHECK SECURITY CONTROL MODULE.
Check and ensure that security control module is installed on the bracket.

CHECK: Is the security control module securely installed?

YES: Go to step 6K2.

NO: Securely install security control module.

6K2: ADJUST SENSITIVITY.
1. Remove security control module.




2. Adjust the sensitivity adjust screw in security control module.

NOTE: After adjusting, be sure to plug the adjust screw hole.

3. Install security control module.
4. Perform impact sensitivity test.

CHECK: Is the sensitivity adjustment Possible?

YES: Impact sensitivity is normal.

NO: Replace security control module.