Hood: Service and Repair

FRONT HOOD

REMOVAL

NOTE:
- The hood lock has a dual locking design which consists of a main lock and a safety lock mechanism. When the release knob located at the front pillar on the driver's side is pulled back, the main lock is released through the cable attached to the knob.
- The safety lock can be released by pushing the lever protruding above the front grill while opening the hood.

1. Open front hood, and remove washer hose.
2. Remove attaching bolts.






3. Detach front hood from hinges.

INSTALLATION

1. Install in the reverse order of removal.
2. Adjust clearance between hood and fender. Clearance must be equal on both sides.