Inspection Mode

9. Inspection Mode
A: OPERATION





Raise the vehicle using a garage jack and place on safety stands or drive the vehicle onto free rollers.

WARNING:
^ Before raising the vehicle, ensure parking brakes are applied.
^ Do not use a pantograph jack in place of a safety stand.
^ Secure a rope or wire to the front and rear towing or tie-down hooks to prevent the lateral runout of front wheels.
^ Do not abruptly depress/release clutch pedal or accelerator pedal during works even when engine is operating at low speeds since this may cause vehicle to jump off free rollers.
^ In order to prevent the vehicle from slipping due to vibration, do not place any wooden blocks or similar items between the safety stands and the vehicle.
^ Since the rear wheels will also rotate, do not place anything near them. Also, make sure that nobody goes in front of the vehicle.