Disassembly and Assembly

C: DISASSEMBLY





1. Using ST, remove hub unit from hub assembly.

CAUTION: Securely set hub assembly so that it does not lean.

ST 398507703DUMMY COLLAR





2. Using ST and a puller (common hand tool), remove bearing inner race.
ST1 399520105 SEAT
ST2 927080000 HUB STAND

CAUTION:
^ Do not remove hub unit bearing unless damaged.
^ Do not re-use hub unit bearing after removal.





3. Using ST, press hub bolt out.
ST 927080000 HUB STAND

CAUTION: Be careful not to hammer hub bolts. This may deform hub.

D: ASSEMBLY





1. Using ST, press new hub bolt into place.

CAUTION:
^ Ensure hub bolt closely contacts hub.
^ Use a 12 mm (0.47 in) hole in the ST to prevent hub bolt from tilting during installation.

ST 927080000 HUB STAND





2. Using ST1, ST2 and ST3, press hub unit bearing into hub.
ST1 927080000 HUB STAND
ST2 927450000 HUB INSTALLER
ST3 28499AEOOO SPACER

CAUTION:
^ Always press inner race when installing hub unit bearing.
^ Use a new hub unit bearing.