Removal and Replacement

Sunroof Assembly

REMOVAL

1. Remove roof trim.
2. Remove sunroof lid.
3. Disconnect drain tubes from sunroof frame.




4. Remove room lamp harness clip.
5. Disconnect sunroof harness connector.




6. Remove motor cover.




7. Remove sunroof brackets front (a) and rear (b).




8. Remove nuts then detach the sunroof frame.

INSTALLATION
Install in the reverse order of removal.

CAUTION: Be careful not to snag the harness.






NOTE:
- Make sure to connect harness connector.
- When installing drain tube, insert it securely onto drain pipe.