With Subaru Select Monitor

CLEAR MEMORY MODE
1. On the Main Menus display screen, select the (2. Each System Check) and press the key.
2. On the System Select Menus display screen, select (Brake System) and press the key.
3. Press the key after displayed the information of engine type.
4. On the brake Control Diagnosis display screen, select the (Clear Memory) and press the key.
5. When the "Done" and "turn ignition switch OFF" are shown on the display screen, turn the Subaru Select Monitor and ignition switch to OFF.

NOTE: For detailed operation procedure, refer to the SUBARU SELECT MONITOR OPERATION MANUAL.