Front Door: Service and Repair

FRONT DOOR PANEL

Front Door Panel:

REMOVAL

1. Disconnect ground cable from battery.
2. Remove front pillar lower trim to disconnect connector from body harness.






3. Put wooden block on jack and place jack under door. Support door with a jack to protect it from damage.






4. Remove checker bolts.






5. Remove door-side bolts for upper and lower hinges to remove door.






CAUTION:
- During removal and installation of doors, do not damage body.
- Doors are heavy. Be careful not to drop and damage them.

INSTALLATION

1. Install in the reverse order of removal.
2. Apply grease to sliding area of door hinges.

Tightening torque: Refer to COMPONENT of General Description.