Front Seat

FRONT SEAT

Front Seat:

REMOVAL

1. While operating button (located on top of backrest), lift headrest out with hand placed between backrest and headrest.






2. Pull reclining lever back to fold backrest all the way forward. While pulling slide adjuster lever, move seat all the way forward.
3. Remove bolt cover at rear end of slide rail.
4. Remove bolts securing seat rear.






5. While pulling slide adjuster lever, slide seat all the way back.
6. Remove bolts securing front of seat.






7. While disconnecting side airbag connector, detach front seat. (Side airbag equipped vehicle) and inner belt connector.

CAUTION:
- When removing seat from vehicle, take care not to damage body, seat, or trim.
- After the front seat has been removed from side airbag equipped vehicle, store it as instructed in AIRBAG REPAIR SECTION.

INSTALLATION

1. While operating button (located on top of backrest), lift headrest out by placing your hand between backrest and headrest.






2. Pull reclining lever back to told backrest all the way forward. Pull slide adjuster lever and move lower slide rail all the way backward.
3. Position seat in compartment and align the holes on the seat with the holes on the vehicle body side.
4. Secure the front of seat using inward and outward bolts (A) and (B) in that order.
5. While pulling slide adjuster lever, move seat all the way forward.
6. Secure the rear of seat using inward and outward bolts (C) and (D).






7. Connect inner belt connector.
8. Connect side airbag connector. (Side airbag equipped model)
9. Install bolt cover on rear end of slide rail.
10. Install headrest on backrest.

CAUTION: Confirm that seat can move smoothly and be locked securely at any position.