Operation CHARM: Car repair manuals for everyone.
Home >> Subaru >> 2002 >> Forester S F4-2.5L SOHC >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Testing and Inspection >> Reading and Clearing Diagnostic Trouble Codes >> How to Display and Read Diagnostic Trouble Codes >> With Subaru Select Monitor

With Subaru Select Monitor

READ DIAGNOSTIC TROUBLE CODE (DTC)





1. Prepare Subaru Select Monitor kit.
2. Connect diagnosis cable to Subaru Select Monitor.





3. Insert cartridge into Subaru Select Monitor.
4. Connect Subaru Select Monitor to data link connector.





1. Data link connector located in the lower portion of the instrument panel (on the driver's side).
2. Connect diagnosis cable to data link connector.





5. Turn ignition switch to ON (engine OFF) and Subaru Select Monitor switch to ON.
6. On the <
> display screen, select the {Each System Check} and press the [YES] key.
7. On the <> display screen, select the {Brake Control System} and press the [YES] key.
8. Press the [YES] key after displayed the information of engine type.
9. On the <> display screen, select the {Diagnostic Code(s) Display} and press the [YES] key.
10. On the <> display screen, select the {Current Diagnostic Code(s)} or {History Diagnostic Code(s)} and press the [YES] key.

NOTE:
^ For detailed operation procedure, refer to the SUBARU SELECT MONITOR OPERATION MANUAL.
^ For detailed concerning diagnostic trouble codes (DTC), refer to the LIST OF DIAGNOSTIC TROUBLE CODE (DTC).

2. READ CURRENT DATA
1. On the <
> display screen, select the {Each System Check} and press the <> key.
2. On the <> display screen, select the {Brake Control System} and press the <> key.
3. Press the <> key after displayed the information of ABS type.
4. On the <> display screen, select the {Current Data Display & Save} and press the <> key.
5. On the <> display screen, select the {Data Display} and press the <> key.
6. Using the scroll key, move the display screen up or down until the desired data is shown.





^ A list of the support data is shown in the table above.

NOTE: For detailed operation procedure, refer to the SUBARU SELECT MONITOR OPERATION MANUAL.
pro multis · About Operation CHARM