Camshaft Sprocket

REMOVAL
1) Remove V-belt.
2) Remove crankshaft pulley.
3) Remove belt cover.
4) Remove timing belt assembly.
5) Remove camshaft position sensor.





6) Remove camshaft sprocket No. 2. To lock camshaft, use ST. ST 499207100 CAMSHAFT SPROCKET WRENCH





7) Remove camshaft sprocket No. 1. To lock camshaft, use ST.
ST 499207400 CAMSHAFT SPROCKET WRENCH

INSTALLATION





1) Install camshaft sprocket No. 1. To lock camshaft, use ST.
ST 499207400 CAMSHAFT SPROCKET WRENCH
Tightening torque: 78 Nm (8.0 kgf-m, 57.9 ft. lbs.)

CAUTION: Do not confuse left and right side camshaft sprockets during installation. The camshaft sprocket No. 2 is identified by a projection used to monitor camshaft position sensor.





2) Install camshaft sprocket No. 2. To lock camshaft, use ST
ST 499207100 CAMSHAFT SPROCKET WRENCH
Tightening torque: 78 Nm (8.0 kgf-m, 57.9 ft. lbs.)
3) Install camshaft position sensor.
4) Install timing belt assembly.
5) Install belt cover.
6) Install crankshaft pulley.
7) Install V-belt.

INSPECTION
1) Check sprocket teeth for abnormal wear and scratches.
2) Make sure there is no free play between sprocket and key.
3) Check camshaft sprocket notch for sensor for damage and contamination of foreign matter.