Condenser HVAC: Service and Repair
Condenser / REMOVAL1. Using refrigerant recovery system, discharge refrigerant.
2. Disconnect ground cable from battery.
3. Disconnect high-pressure hose (A) and high-pressure pipe (B) from condenser.
4. Remove radiator bracket (A).
5. Remove 2 mounting bolts. While lifting condenser, pull it out through the space between the radiator and the radiator panel.
CAUTION: Be careful not to damage the condenser fins. If a damaged fin is found, repair it using a thin screwdriver.
If the condenser is replaced, add appropriate amount of compressor oil to the compressor.
INSTALLATION
1. Install in the reverse order of removal.
CAUTION: Replace O-rings on hoses or pipes with new ones, and then apply compressor oil. Confirm that lower guide (A) of condenser has been fitted into holes on radiator panel (B).
2. Charge refrigerant.