Disassembly and Assembly

Combination Meter Assembly / DISASSEMBLY

CAUTION: Use gloves to avoid damage and getting fingerprints on the glass surface and meter surfaces.


1. Disengage claw (F) to remove case (B) from back cover (A).






2. Disengage claw (G) to remove meter glass (E), reflector (D) and window plate (C) from inner case.
3. Pull up claw (A) of combination meter printed circuit with combination pliers. Push out speedometer assembly (B) and tachometer assembly (C) using hole (D).






4. Pull up claw in the center of combination meter printed circuit and remove combination meter printed circuit from case (F).



ASSEMBLY
Assemble in the reverse order of disassembly