Driver Airbag Module

REMOVAL

1. Position the front wheels straight ahead. (After moving a vehicle more than 5 m (16 ft) with front wheels positioned straight ahead, make sure that the vehicle moves straight ahead).
2. Turn the ignition switch OFF.
3. Disconnect the ground terminal from battery, and wait for at least 20 seconds before starting work.




4. Using TORX (R) BIT T30, remove the two TORX (R) bolts on the side of steering wheel.




5. Disconnect the airbag connector on the back of airbag module, and then remove the airbag module.
6. Refer to the "CAUTION" for handling of a removed airbag module.

INSTALLATION

1. Install in the reverse order of removal.

CAUTION: Do not allow harness and connectors to interfere or get tangled up with other parts.