Timing Cover: Service and Repair

REMOVAL
1. Remove the V-belt.
2. Remove the crankshaft pulley.





3. Remove the left-hand belt cover (A).
4. Remove the right-hand belt cover (B).
5. Remove the front belt cover (C).

INSTALLATION





1. Install the front belt cover (C).
Tightening torque: 5 Nm (0.5 kgf-m, 3.6 ft. lbs.)
2. Install the right-hand belt cover (B).
Tightening torque: 5 Nm (0.5 kgf-m, 3.6 ft. lbs.)
3. Install the left-hand belt cover (A).
Tightening torque: 5 Nm (0.5 kgf-m, 3.6 ft. lbs.)
4. Install the crankshaft pulley.
5. Install the V-belt.

INSPECTION
Make sure the cover is not damaged.