Wipers

FRONT WIPER
1. The front wiper is of a tandem type featuring wide wiping area. The blade is installed to the arm by means of U-hook joint to improve serviceability.
2. The front wiper operates in the HI and LOW speed modes and the INTERMITTENT mode. The operation modes can be selected by turning the wiper switch incorporated in the combination switch.
3. In the INTERMITTENT mode, the intermittent unit installed behind the combination switch controls the front wiper operation interval.
4. The front wiper system uses a modular construction in which the wiper motor forms an integral part of the linkage. The motor is installed on the body through rubber mounting.





REAR WIPER
1. The rear wiper operates intermittently at a 10-second interval.
2. The rear wiper operates over a 168° angle.
3. The wiper blade is attached to the arm by means of a U-hook joint in the same way as with the front wipers.