Fuel Injector: Service and Repair
REMOVALRH SIDE
1. Remove the intake manifold.
2. Remove the fuel pipe protector RH.
3. Disconnect the connector from the fuel injector.
4. Remove the bolts which hold the injector pipe to intake manifold.
5. Remove the fuel injector while lifting up the fuel injector pipe.
LH SIDE
1. Remove the intake manifold.
2. Remove the fuel pipe protector LH.
3. Disconnect the connector from the fuel injector.
4. Remove the bolts which hold the injector pipe to intake manifold.
5. Remove the fuel injector while lifting up the fuel injector pipe.
INSTALLATION
RH SIDE
Install in the reverse order of removal.
NOTE: Replace the O-ring and insulators with new ones.
Tightening Torque: 19 Nm (1.94 kgf-m, 13.7 ft. lbs)
Tightening Torque: 19 Nm (1.94 kgf-m, 13.7 ft. lbs)
Tightening Torque: 19 Nm (1.94 kgf-m, 13.7 ft. lbs)
LH SIDE
Install in the reverse order of removal.
NOTE: Replace the O-ring and insulators with new ones.
Tightening Torque: 4.9 Nm (0.5 kgf-m, 3.6 ft. lbs)
Tightening Torque: 19 Nm (1.94 kgf-m, 13.7 ft. lbs)
Tightening Torque: 19 Nm (1.94 kgf-m, 13.7 ft. lbs)
Tightening Torque: 19 Nm (1.94 kgf-m, 13.7 ft. lbs)