Spark Plug

Spark Plug Gap Specifications

Spark Plug Gap 0.7 - 0.8 mm (0.028 - 0.031 in.)

Spark Plug Specifications

RH SIDE

Tightening Torque (Spark plug) 21 Nm (2.1 kgf-m, 15 ft. lbs)
Tightening Torque (Ignition coil) 16 Nm (1.63 kgf-m, 11.8 ft. lbs)

CAUTION: The above torque should be only applied to new spark plugs without oil on their threads. In case their threads are lubricated, the torque should be reduced by approximately 1/3 of the specified torque in order to avoid over-stressing.

LH SIDE

Tightening Torque (Spark plug) 21 Nm (2.1 kgf-m, 15 ft. lbs)
Tightening Torque (Ignition coil) 16 Nm (1.63 kgf-m, 11.8 ft. lbs)

CAUTION: The above torque should be only applied to new spark plugs without oil on their threads. In case their threads are lubricated, the torque should be reduced by approximately 1/3 of the specified torque in order to avoid over-stressing.