Removal and Installation
Reverse Check SleeveREMOVAL
1. Remove the manual transmission assembly from vehicle.
2. Remove the transfer case with extension case assembly.
3. Remove shifter arm.
4. Remove plug, spring washer and reverse check ball.
5. Remove the reverse check sleeve.
INSTALLATION
1. Install the reverse check sleeve.
Tightening torque: 6.4 Nm (0.65 kgf-cm, 4. 7 ft. lbs.)
2. Install ball, spring, washer and plug to transfer case.
Tightening torque: 10 Nm (1.0 kgf-cm, 7.2 ft. lbs.)
3. Install the shifter arm to transfer case assembly.
4. Install the transfer case with extension case assembly.
5. Install the manual transmission assembly to vehicle.