Rear Seat

DISASSEMBLY

1. WAGON

1. Remove rear seat.
2. Remove bolts, and then remove bracket hinge.






3. Remove rear backrest lock cover.






4. While turning counterclockwise rear backrest knob, remove it.
5. While picking up tip with pliers, remove headrest lock bushings.






6. Remove backrest hook.






7. Remove hook at bottom.






8. Remove 4 pawls.






9. Remove 8 hog rings.






10. Remove the hog rings on front side of cushion pad.

Armrest not-equipped vehicle:






Armrest-equipped vehicle:






11. Remove cover. When disassembly of rear seat cushion is required, proceed to the following steps.
12. Remove bolts, and then remove cushion hinge.






13. Remove rear cushion mat.






14. Remove hook, and then remove frame.






15. Remove hog rings, and then remove cover.






2. SEDAN

1. Remove the rear seat from the vehicle.
2. Remove the wiring from around the seat backrest.
3. Remove the two nuts and remove the armrest assembly.






4. Remove the wiring, and then remove the seat cover.






5. Remove the wiring around the seat cushion.






6. Remove the wiring, and then remove the seat cover






ASSEMBLY

1. WAGON

1. Assemble in the reverse order of disassembly.

NOTE:
- Do not contaminate or damage cover.
- While installing wire rings, prevent seat from getting wrinkled.

2. SEDAN

1. Assemble in the reverse order of disassembly.

NOTE:
- Do not contaminate or damage cover.
- While installing wire rings, prevent seat from getting wrinkled.