Passenger Airbag Module

Passenger's Airbag Module

REMOVAL

CAUTION: Refer to "CAUTION" in General Description before handling the airbag module.

1. Turn ignition switch OFF.
2. Disconnect ground cable from battery, and wait for at least 20 seconds before starting work.
3. Pull out the two stopper pins and lower the glove box.
4. Disconnect airbag connector (A), and then detach airbag connector from support beam bracket.




5. Remove three bolts, and then carefully remove airbag module upward.
6. Refer to "CAUTION" for handling of a removed airbag module.

INSTALLATION
Install in the reverse order of removal.

CAUTION: Do not allow harness and connectors to interfere or get tangled up with other parts.