General Procedure

REMOVAL
1) Remove engine from body.





2) After removing engine from body, install ST onto engine.
ST 18232AA000 ENGINE STAND
3) Remove sensors, pipes, and hoses installed on engine before starting overhaul.
(1) Remove intake manifold.
(2) Remove generator.
(3) Remove A/C compressor.
(4) Remove EGR pipe.
(5) Remove water pipe and hoses.
(6) Remove engine harness.
(7) Remove spark plugs.
(8) Remove camshaft position sensor.
(9) Remove crankshaft position sensor.
(10) Remove knock sensor.
(11) Remove engine temperature sensor.
(12) Remove oil pressure switch.
(13) Remove oil filter.
(14) Remove oil cooler.