Fluid - M/T: Service and Repair

REPLACEMENT
1. Pull out oil level gauge.
2. Lift-up the vehicle.





3. Drain transmission gear oil completely.

CAUTION: Directly after the engine has been running, the transmission gear oil is hot. Be careful not to burn yourself.

NOTE: Tighten transmission gear oil drain plug after draining transmission gear oil.

Tightening torque: 44 Nm (4.5 kgf-cm, 32.5 ft. lbs.)
4. Lower the vehicle.
5. Pour gear oil into the gauge hole.
Recommended gear oil: Use GL-5 or equivalent.
Gear oil capacity: 3.5 l (3.7 US qt. 3.1 Imp qt)
6. Check the level of the transmission gear oil.

CAUTION: When inserting the level gauge into transmission gear, align the protrusion on the side of the top part of the level gauge with the notch in the gauge hole.

NOTE: The level should be within the specified range marked on the gauge.