Radiator Main Fan

Radiator Main Fan and Fan Motor

REMOVAL





1. Disconnect battery around cable.
2. Lift-up the vehicle.





3. Remove under cover.





4. Disconnect connector of main fan motor.
5. Lower the vehicle.





6. Remove air intake duct.





7. Disconnect overflow hose.





8. Remove reservoir tank.





9. Remove radiator main fan motor assembly.

INSTALLATION
Install in the reverse order of removal.





NOTE: When the main fan motor assembly cannot be installed as is, loosen the sub fan motor assembly securing bolts to install it.





Tightening torque: 4.9 Nm (0.50 kgf-m, 3.6 ft. lbs.)

DISASSEMBLY





1. Remove clip which holds motor connector onto shroud.





2. Remove nut which holds fan itself onto fan motor and shroud assembly.





3. Remove bolts which install fan motor onto shroud.

ASSEMBLY





Assemble in the reverse order of disassembly.





Tightening torque: 4.4 Nm (0.45 kgf-m, 3.3 ft. lbs.)
Tightening torque: 3.4 Nm (0.35 kgf-m, 2.5 ft. lbs.)

INSPECTION
1. Connect battery positive (+) terminal to terminal No. 2, and negative (-) terminal to terminal No. 1 of main fan motor connector.





2. Make sure the main fan motor operates properly. Replace it if it doesn't.